MIB Instruments Co Ltd
We Make Things Better!!
Introduction
Features
The CONCORD CRH01 decoder is built to providemodel-train hobbyists with a professional control of their DCC locomotives.
It supports the most advance DCC operations like bi-directional communication (RailCom), asymmetric DCC signal (ADCC) , BEMF-motor control and SUSI interface.
With the updatable ability using the update module – CRHGOUP, Concord decoder is geared to the future changes in those related industrial standards.
The Concord decoder fully tested to be compatible with many DCC systems from other manufacturers.
And it has been submitted for independentNMRA testing.
It supports the most advance DCC operations like bi-directional communication (RailCom), asymmetric DCC signal (ADCC) , BEMF-motor control and SUSI interface.
With the updatable ability using the update module – CRHGOUP, Concord decoder is geared to the future changes in those related industrial standards.
The Concord decoder fully tested to be compatible with many DCC systems from other manufacturers.
And it has been submitted for independentNMRA testing.
The MIB Concord locomotive decoder is suitable for all DC
locomotives with continuous current draw of 1.2 Amp. The characteristics of the
decoder are as follows:
ØAbility to be updated with new firmware by the end user through update module- CRHGOUP
ØSuper smooth and silent high frequency back-emf motor control
ØSupports the industry proposed enhancements to the NMRA DCC Bidirectional data communication RP 9.3.1 and 9.3.2
ØAsymmetrical DCC support including directional stopping, with adjustable precision stopping control
ØSUSI interface
ØProvides 1.2A continuous motor current
ØMotor outputs protected
ØFour function outputs rated at 250mA (500mA total) each with advanced function mapping
ØDirectional or independent lighting with brightness and extensive special effects (Constant, Fire Box, Mars, Flash, Single Pulse Strobe, Double Pulse Strobe, Rotary Beacon and Gyra Light)
ØSupports advanced Consist Control and extended addressing
ØOptional operation on conventional DC layouts( analog DC mode)
ØProgrammable Start, Mid and Maximum speed works for all speed modes
Ø14, 28 and 128 speed steps. Uploadable speed table interpolated to 128 speed steps
ØSupport for programming on the mainline (operations mode programming)
ØCV accessible by PC software through update module- CRHGOUP
ØSupport for all forms of programming as described in NMRA RP-9.2.3
ØConvenient 9-pin plug
ØSize: Length 23.0 mm x Width 17.0 mm x Height 5.0 mm
ØAbility to be updated with new firmware by the end user through update module- CRHGOUP
ØSuper smooth and silent high frequency back-emf motor control
ØSupports the industry proposed enhancements to the NMRA DCC Bidirectional data communication RP 9.3.1 and 9.3.2
ØAsymmetrical DCC support including directional stopping, with adjustable precision stopping control
ØSUSI interface
ØProvides 1.2A continuous motor current
ØMotor outputs protected
ØFour function outputs rated at 250mA (500mA total) each with advanced function mapping
ØDirectional or independent lighting with brightness and extensive special effects (Constant, Fire Box, Mars, Flash, Single Pulse Strobe, Double Pulse Strobe, Rotary Beacon and Gyra Light)
ØSupports advanced Consist Control and extended addressing
ØOptional operation on conventional DC layouts( analog DC mode)
ØProgrammable Start, Mid and Maximum speed works for all speed modes
Ø14, 28 and 128 speed steps. Uploadable speed table interpolated to 128 speed steps
ØSupport for programming on the mainline (operations mode programming)
ØCV accessible by PC software through update module- CRHGOUP
ØSupport for all forms of programming as described in NMRA RP-9.2.3
ØConvenient 9-pin plug
ØSize: Length 23.0 mm x Width 17.0 mm x Height 5.0 mm
Concord DCC Decoder Silent Back-EMF
